OP101: RT-LAB - Real-Time Simulation Systems Fundamentals

This course introduces OPAL-RT systems and applications using RT-LAB. This course is a prerequisite for ARTEMiS, eFPGASIM, and ePHASORSIM. RT-LAB is used in a variety of domains, including power systems, power electronics, automotive applications, aerospace, mechatronics and more. It includes a half-day lab set-up, where the instructor will configure the real-time simulator with the user’s lab en…

OP102: HYPERSIM® - Introduction to Power Systems Real-Time Simulation

This course teaches the basics of the HYPERSIM® real-time simulation software platform and its operating principle. It includes a half-day lab set-up, where the instructor will configure the real-time simulator with the user’s lab environment. The duration of this course is 4 days.

OP103: NI VeriStand Add-on (eHS) - Introduction to Power Electronics Real-Time Simulation

This course covers the configuration of a real-time system using the OPAL-RT Power Electronics Add-On for NI VeriStand on the National Instruments hardware platform. It includes a half-day lab set-up, where the instructor will configure the real-time simulator with the user’s lab environment. The duration of this course is 3 days.

OP203: ARTEMiS - Power Systems Real-Time Simulation

This course is intended for professionals who want to simulate power systems with ARTEMiS by converting their Simulink® SimPowerSystems™-based model into a complete HIL system. The duration of this course is 1 day.

OP204: ePHASORSIM - Electro-Mechanical Real-Time Simulation

This course is intended for new ePHASORSIM users who want to learn phasor domain real-time simulation. ePHASORSIM simulates electro-mechanical transient stability phenomena of very large power grids with thousands of buses, generators, transformers, transmission lines, loads and controllers. The duration of this course is 1 day.

OP206: MMC - Modular Multilevel Converter Real-Time Simulation Applications

This course is designed for power electronics and control engineers who want to use the capabilities of FPGA programming and OPAL-RT’s dedicated Modular Multilevel Converter (MMC) library to perform fast, real-time simulation and controller logic design. The duration of this course is 2 days.

OP207: RT-XSG - Introduction to I/O Management on FPGA

RT-XSG (XILINX System Generator) is a Simulink® toolbox that enables engineers to generate custom, application-specific firmwares that can be implemented onto an FPGA device for multiple applications. This course covers the basic concepts needed to adapt an I/O to an FPGA model with eHS. The duration of this course is 2 days.

OP210: Introduction to 4-Quadrant PHIL Testbench

This course covers the installation and SAT of an OP1400 series 4-Quadrant PHIL Testbench. It includes a half-day lab set-up (Installation), where the instructor will help the end-user configure the real-time simulator, the amplifier(s), the cabling and other parts of the Testbench with a consideration for the lab environment and security. The duration of this course is 3 days.

OP211: Introduction to 4-Quadrant PHIL Microgrid Testbench

This course covers the installation and SAT of an OP1420 series 4-Quadrant PHIL Microgrid Testbench. It includes a half-day lab set-up (Installation), where the instructor will help the end-user configure the real-time simulator, the amplifier(s), the cabling and other parts of the Testbench with a consideration for the lab environment and security. The duration of this course is 4 days.

OP212: EXata CPS - Integration of EXata CPS with RT-LAB / HYPERSIM

This course covers the integration of Keysight EXata CPS with RT-LAB and HYPERSIM. Participants learn the installation process for co-simulation setup, discover the basics of the EXata software, and learn how to integrate RT-LAB or HYPERSIM and EXata. The duration of this course is 1 day.

OP303: Real-Time Simulation of an Electrical Motor on FPGA

For HIL-testing of Electronic Control Units (ECUs), the real-time simulation of an electrical motor should be as close to reality as possible. Reaching a reliable implementation of HIL for Electric Vehicles (EV) requires a specific methodology and specific know-how. The objective of this course is to provide the notions required to succeed in your electrical motor HIL implementation. The duration…

OP205: eHS - Power Electronics Real-Time Simulation

This course is intended for power electronics and control engineers who want to perform fast power electronics real-time simulation using the combined power of FPGA and OPAL-RT’s unique dedicated solver eHS. The duration of this course is 1 day.

Workshop, Brazil (Sept. 18, 2025) | eHS – Real-Time Power Electronics Simulation

The eHS – Real-Time Power Electronics Simulation workshop was held on September 18th, 2025, at the Federal University of Minas Gerais (UFMG). It was conducted by Thais Blasi from OPAL-RT TECHNOLOGIES.The session introduced participants to the fundamentals of real-time simulation, focusing on its principles and core concepts. It also explored the co-simulation structure between CPU and FPGA, highl…

Workshop, Brazil (Sept. 18, 2025) | HYPERSIM – Real-Time Power System Simulation

The workshop HYPERSIM – Real-Time Power System Simulation, held on September 18th, 2025, at the Federal University of Minas Gerais (UFMG) and conducted by Thais Blasi from OPAL-RT TECHNOLOGIES, introduced participants to the power systems of the future and the importance of real-time simulation. It also presented HYPERSIM's role in analyzing and validating complex electrical systems, showcased ex…

Workshop, Brazil (Sept. 18, 2025) | HYPERSIM – Real-Time Power System Simulation

The workshop HYPERSIM – Real-Time Power System Simulation, held on September 18th, 2025, at the Federal University of Minas Gerais (UFMG) and conducted by Thais Blasi from OPAL-RT TECHNOLOGIES, introduced participants to the power systems of the future and the importance of real-time simulation. It also presented HYPERSIM's role in analyzing and validating complex electrical systems, showcased ex…

Workshop, Brazil (Sept. 18, 2025) | eHS – Real-Time Power Electronics Simulation

The eHS – Real-Time Power Electronics Simulation workshop was held on September 18th, 2025, at the Federal University of Minas Gerais (UFMG). It was conducted by Thais Blasi from OPAL-RT TECHNOLOGIES.The session introduced participants to the fundamentals of real-time simulation, focusing on its principles and core concepts. It also explored the co-simulation structure between CPU and FPGA, highl…

Webinar | Tutorial: Getting Started with Blackbox Model Integration in HYPERSIM

On September 17, 2025, at 11:00 AM EDT, OPAL-RT hosted a webinar on integrating blackbox control models in HYPERSIM to better capture the behavior of inverter-based resources (IBRs) and data centers in the modern power grid. The session provided a practical overview of intuitive workflows, including a Simulink-based workflow for generating and integrating models, a C++ source code workflow aligne…

Webinar | Tutorial: Getting Started with Blackbox Model Integration in HYPERSIM

On September 17, 2025, at 11:00 AM EDT, OPAL-RT hosted a webinar on integrating blackbox control models in HYPERSIM to better capture the behavior of inverter-based resources (IBRs) and data centers in the modern power grid. The session provided a practical overview of intuitive workflows, including a Simulink-based workflow for generating and integrating models, a C++ source code workflow aligne…